Cement-based mortar used to improve the surface hardness and resistance to heavy loads of industrial floors.
Classified as CT-C70-F7-AR2 type cementitious screed mortar according to European standard ΕΝ 13813.
Produced in grey and 6 more colours (minimum quantity 500kg): white, beige, brick-red, yellow, light blue and green.
It is used on still damp concrete floors to produce surfaces with significantly increased abrasion and heavy-load resistance, as well as reduced water permeability.
Suitable for indoor and outdoor areas, parking lots, workshops, garages, warehouses, loading-unloading areas, etc.
In cases where further densification and hardening of the finished surface is required, apply the liquid concrete densifier SIL•HARD Li+.
For the optimal curing of the finished surface, especially during summer, apply the concrete curing products FINOCURE•W and FINOCURE•AC.
Approximately 3-6 kg/m2.
Available in:
- 25kg paper bags
Storage: 12 months from production date, if stored in original, sealed packaging, protected from direct sunlight and moisture.
